MakerWorld
Hueforge & Lithophane
Zum Modell
Sun - hueforge
5
Downloads
11
Likes
3
Makes
This is 4 color Hueforge of Sun I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini. Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm This print uses 4 unique filaments PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 6.4 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 PLA BambuLab Basic Jade White Transmission Distance: 4.6 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Orange At layer #14 (1.2mm) swap to Sunflower Yellow At layer #19 (1.6mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
