Superman Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 110x170 x 2.13 mm in size Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Esun Bone White Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Grey At layer #13 (1.12mm) swap to Bone White At layer #18 (1.52mm) swap to White for the rest. Kindly Note That I Use Outer-Brim For Better Adhesion, If You Don't Want It You Can Disable It. Hope You Like It, And If So It Would Be Much Appreciated To Buy Me A Coffee buymeacoffee.com/Mo_Nour