Superman Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.09x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.20592mmFilaments Used: #080a0d PLA+ Sunlu Black Transmission Distance: 0.3 #565d65 PLA+ Sunlu Grey Transmission Distance: 2 #ffffff PLA Sunlu Matte White Transmission Distance: 5 #ee465c PLA Sunlu Matte Red Transmission Distance: 3This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Grey At layer #10 (0.88mm) swap to White At layer #21 (1.76mm) swap to Red for the rest.