Thingiverse
Surface Pro 4 Minimalist Wall Mount
von cperuffo3
6
Downloads
12
Likes
0
Makes
This is a model I made to mount an old Surface Pro 4 I had around to be a smart-home control tablet. It MAY fit other surface products but I have not tested them.
It mounts to any wall using standard #6 screws.
To place the screws properly, use the printed assembly as a template without the tablet. Mark the hole locations (and mark the 2 top corner edges to help later with placing the tablet properly.
Clip the parts around the tablet, seat the dovetail, line the top corners up with your marks from before, and then slide the whole assembly onto the pre-mounted screws.
To modify to fit your needs, the onshape file is here:
https://cad.onshape.com/documents/5259a7e2b8abd9b73e57ba43/w/1db2b555dfe6ba42e3f26bf0/e/eec159a738a9484dc39ef5fd?renderMode=0&uiState=64f397d3a53d1304f888eb4f
Enjoy!
It mounts to any wall using standard #6 screws.
To place the screws properly, use the printed assembly as a template without the tablet. Mark the hole locations (and mark the 2 top corner edges to help later with placing the tablet properly.
Clip the parts around the tablet, seat the dovetail, line the top corners up with your marks from before, and then slide the whole assembly onto the pre-mounted screws.
To modify to fit your needs, the onshape file is here:
https://cad.onshape.com/documents/5259a7e2b8abd9b73e57ba43/w/1db2b555dfe6ba42e3f26bf0/e/eec159a738a9484dc39ef5fd?renderMode=0&uiState=64f397d3a53d1304f888eb4f
Enjoy!
cperuffo3 veröffentlicht auch auf
12 zusätzliche Modelle auf 2 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
