Suspended Ghost

  A delightful and spooky Halloween decoration featuring a ghost suspended midair beneath a soft glowing light.    Surrounding the ghost are charming details: a pumpkin carved with “BOO,” an upside-down bat, a frightened cat, a second ghost carrying a trick-or-treat pumpkin bag, a grave with a zombie hand reaching out, and a haunting background scene that ties it all together.   This 3D printable design captures the playful yet eerie essence of Halloween. It can be printed as a single piece or in separate parts for easy painting and assembly, making it an excellent centerpiece for seasonal displays or LED-lit shadowboxes.     Feel free to arrange the scene however you want, change the locations of the decor and make it truly your own!   Instructions:   Use a slow acting glue if possible, I use superglue since I have experience in assembling them. Even so, I sometime mess it up! Supports ARE NOT needed. Try not to use the Super Tack plate, taking the print off may damage the strings. When you finish printing, LET IT COOL! If you try to pull it off while it is hot, the strings will bend. This is especially true with this model, the body is very thin and fragile, the plate needs to be cold and the print will pop off without issues. Once the two halves are joined using the ring, apply a small drop of glue and attach the little owl. The bottom of it was cut using the curve of the ghost, but you can pretty much glue it anywhere you want. Next is the little bat (flip the whole thing upside down for easier access) and the pumpkin Apply small amount of glue to the bottom of the cat, it is very thin so small amount is needed. Same thing with the halloween backdrop, small amount on the edge is enough Most models with strings only use a single 0.24 layer high string, I use two. That way, if one fails, the other usually does not. There are other variations on the way, such as AMS painted, strings different color and support for the lamp and waterproof pucks. But, you also need t