Thingiverse

Switchbot Camera Hood

by il_moe

0 Downloads

0 Likes

0 Makes

Hood for Switchbot camera. Useful if you use the camera facing out a window and need to eliminate reflections. Print in vase/spiralize contour mode with 0 bottom layers and 0.8 nozzle. Make sure the wide part is on the bed, the opposite of the image. Needs to be mounted by pushing in from the backside of the camera, remove cable and stand and push it through.

accessory camera camera hood hood lens hood security camera switchbot switchbot accessory switchbot camera

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Switchbot Camera Hood ?

Any FDM printer should handle Switchbot Camera Hood just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Switchbot Camera Hood need supports when printing?

No supports needed for Switchbot Camera Hood — it's designed to print clean off the bed.

What file format is Switchbot Camera Hood available in?

Switchbot Camera Hood is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Switchbot Camera Hood free to download?

Yes, Switchbot Camera Hood is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Switchbot Camera Hood

Add to Collection