Sylvanas

Project: Sylvanas.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 200x135.31mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.1mm and the Actual Depth is 2.2mmFilaments Used: PLA Kexcelled Black Transmission Distance: 0.2 PLA Jessie Premium Quarter White Transmission Distance: 5.4 PLA Jessie Premium Pure Magenta Transmission Distance: 2.4 PLA Kexcelled White Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.8mm) swap to Quarter White At layer #13 (1.2mm) swap to Pure Magenta At layer #16 (1.44mm) swap to White for the rest.