Synthesis

When the mind and the heart are connected. Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below. Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.8 PLA BambuLab Basic Jade White Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 1 PLA BambuLab Matte Lemon Yellow Transmission Distance: 5 Swap Instructions: Start with Charcoal At layer #4 (