Thingiverse
Synthesis
door TheMazePrinter
4
Downloads
7
Likes
0
Makes
When the mind and the heart are connected.
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.8
PLA BambuLab Basic Jade White Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 1
PLA BambuLab Matte Lemon Yellow Transmission Distance: 5
Swap Instructions:
Start with Charcoal
At layer #4 (0.92mm) swap to Jade White
At layer #5 (1.12mm) swap to Red
At layer #8 (1.72mm) swap to Lemon Yellow for the rest.
Happy printing!
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.8
PLA BambuLab Basic Jade White Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 1
PLA BambuLab Matte Lemon Yellow Transmission Distance: 5
Swap Instructions:
Start with Charcoal
At layer #4 (0.92mm) swap to Jade White
At layer #5 (1.12mm) swap to Red
At layer #8 (1.72mm) swap to Lemon Yellow for the rest.
Happy printing!
TheMazePrinter publiceert ook op
20 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
