tabernack666

This is an LED lamp created to also house a 7" record. The flat pieces (doors, roof front and back, and back panel .svg files) were cut with a glowforge out of 1/8" acrylic. The columns, coffin sides, and hinges were printed with an SLA printer, and everything else was printed with an FDM printer. A tiny bit of sanding may be required for fitting the columns onto the beams and base. 12x 1cm pieces of aluminum tubing were used to rivet the doors to the hinges and 2x 23cm of aluminum tubing were used to connect the hinges to the knuckles and base. Instructions for making the LED strip are not included.