Tactile Button Case

It consist of 3 parts:
- Base
- Case
- Button

Additional items needed (or similar alternatives):
- Soldering iron and some solder wire
- Electronics glue [Link Here on Amazon](https://www.amazon.de/Pattex-1472319-Spezialkleber-Kunststoff-30G/dp/B004S1WE4M/ref=sr_1_1?s=diy&ie=UTF8&qid=1519562521&sr=1-1&keywords=pattex+plastic+glue)
- (optional) hot glue through a hot glue gun
- 0.14mm2 red and black wire to connect the button.

*This is for mounting 6x6x3mm tactile button switches.*

When i assemble this i mount the switch into the case and bend 2 of the legs inwards. I solder 2 wires to the button ends, push the wires through the base and add a drop of glue to the base edges and fit the case in. Afterwards i put a drop of glue on the button's top and put the 3d printed button in the case. Optionally some hot glue can be added in the inside at the wires for a bit more strength but i think its not really needed.