Target stand

Okay. The original design I created and published used 2x4 inch wood for the cross bar, and for the supports. The uprights were to be 1/2x2 inch or 1x2 inch (see Image 1).The increased height of the bases meant the upright supports did not move significantly. However, it also meant the design used more filament. Hugo123 (see hyperlink) gave me great feedback on the initial design that helped to improve the design. https://www.crealitycloud.com/user-profile/7744178243/modelsInstead of making the stand for 2x4 inch wood, I reduced the size to 2x2 inch wood. I kept the upright holes for 1x2 inches of wood as that gave greater sturdiness when attaching the target.When printing left and right bases simple mirror the print.There can be some wobbling with the uprights, this is easily solved by use of shims.The bases can also use shims if the 2x2's are a bit loose. Otherwise is you drill holes in the bases and screw the 2x2's in place.All feedback is appreciated.Settings:PLA or PLA +Temp filament: 225Temp bed: 65Infill for base: 20%Infill for set screw: 99%Adhesion for base: RaftSupports: Normal, Zig ZagSpeed: depends on filament and printer