Taurus

 The Model is 200x200mm in size. You can adjust the X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments. Substitute as needed. Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #14 (1.2mm) swap to Gray At layer #21 (1.76mm) swap to Jade White for the rest.