Teaching Clock

I home School my kids so I figured I would design a clock to teach my little one how to tell time on an analog clock. It's a really simple design, the clock and hands were printed from PLA with the bushings and washers being printed out of PETG. It does require a M3X4MM heat sink nut and a M3X10MM screw. I put a little bit of thread lock on the screw so it wouldn't back out. You don't tighten the screw down all the way so the hand can stil turn freely. Hope this is useful! If you have any questions feel free to reach out to me on Insta or Tiktok @Prettyprint3d