Tentacles - HueForge

Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Nozzle: 0.4 The Model is 200x194.53mm in sizeYou may print at higher layer heights below the Min Depth of 1.2mmThe Max Depth is 3.2mm and the Actual Depth is 3.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ IIID Max Navy Blue Transmission Distance: 3.6 PLA+ IIID Max Blue Transmission Distance: 2.8 PLA PolyLite White Transmission Distance: 5 Swap Instructions: Start with Black At layer #20 (1.68mm) swap to Navy Blue At layer #24 (2mm) swap to Blue At layer #32 (2.64mm) swap to White for the rest