The Crazy Cat Rattle !

🐱 The Crazy Cat Rattle (EN)

A fun little toy for a baby or young child!

⚠️ Please note: This is a 3D-printed object. Always check for sharp edges. If needed, smooth them out with a knife or sandpaper to make it safe and comfortable to touch. While it might seem fine right off the printer, I strongly recommend post-processing. Only give it to your child if you are sure it is safe and responsible to do so.

📺 Also check out my YouTube channel and support me by subscribing and maybe watching a video!

👉 youtube.com/@ElektroTechNL?sub_confirmation=1

🛠️ Print Instructions:
Print the rattle balls first.

While printing the rattle body, pause the print at layer 55 to insert the balls into the chamber. Then resume printing.

I used 4 balls, but feel free to use more or fewer depending on your preference.

⚙️ Print Settings:
Nozzle size: 0.4 mm

Layer height: 0.20 mm (standard profile)

Infill: 15% (or as desired)

Supports: Not required

Material: PLA

Brim: Use brim for the rattle balls on