"The HUM Box V2.0" 3D Printer

"The HUM Box V2.0" (Cyclops 2 in 1 out)

Build Volume 200 x 200 x 240
Most likely you can squeeze out a bit more as the glass is 220 x 220
Quality of the print:
6.25 micron over X and Y if you use 20t pulleys
5.0 micron over X and Y if you use 16t pulleys
If you want to print a low layer height on the Z, it is recommended to set the layer height to 0.04 or 0.08 to get the correct measurements.

It's time to start building.

Parts will be released in batches, included will be some drawings.
Most explanations on how to build is written on the drawings.
Multipage PDF files will not show up between the pictures and are only available via Thing Files download

Note: In the drawings there is 20x20x1mm Aluminium extrusions used, you can also use 20x20x1.5mm (that is what we going to use). Gives a bit more body for the threads you need to make.

Pictures (maybe video) of the progress will be posted in a later state.

There are some people on the globe that are asking "Is thi