The Loop Riser

This is my strong riser designed for raising the height of any object you want by 125mm (126mm with TPU base). I made it for myself to raise my vertical mounted AMS lite whilst retaining the useful space underneath. I have removed the small hole at the rear in the public release which I used specifically for a switch . It comes with a fitted TPU base for those that want the extra grip. This can be either seated in place or glued for a permanent fit. External Dimensions are:240mm wide (210mm usable flat top surface)200mm deep125mm height (126mm with TPU base)Internal usable dimension below the riser are:210mm wide185mm deep110mm height (111mm with TPU base) *minus a small amount of usable space in the upper left and right due to curve I have designed it to print with strength in mind on my Bambu Lab A1. Orientation is with the back face on the build plate to have strength through the top surface to the side legs. I personally printed it at 0.16mm layer height for a beautiful finish in P