The Ten Commandments Scroll

As a request, The Ten Commandments is inscribed on an old scroll - not quite the stone tablet brought down by Moses. Just another take on an aged artifact. This can be scaled down to 200mm width for printing. I have not tried anything lower to get the commandments perfectly legible. The Ten Commandments ScrollPictures shown are printed in an 0.4mm NozzlePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Brown Transmission Distance: 2.4 ( or Orange)PLA BambuLab Basic Gold Transmission Distance: 5PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer (0.88mm) swap to Brown (or Orange)At layer (1.12mm) swap to GoldAt layer (1.28mm) swap to Jade White for the rest. Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%.