Thingiverse
Thrustmaster TFRP Corner Brackets
por ematt622
1
Descargas
0
Likes
0
Makes
# Overview
Brackets for securing rudder pedals to a baseboard. I used a 35" x 24" MDF board, and screwed these into the board in the correct location.
## Note:
Back and Front are separate parts, but each one works on both sides ( for example, "front" works on the front left and front right).
# Included files:
STL files of corner brackets for 3D Printing
STL files of corner brackets for laser cutting (or simpler/faster printing)
DXF files of corner brackets for laser cutting
# CAD
Click [here](https://cad.onshape.com/documents/591c224552473ec9ef428d7b/w/77b22edcc5f0994943cc0e72/e/9c973f793ee76a6e7d7907b5?renderMode=0&uiState=67a13a6e0b3f1d4205cf7654) for OnShape file
Brackets for securing rudder pedals to a baseboard. I used a 35" x 24" MDF board, and screwed these into the board in the correct location.
## Note:
Back and Front are separate parts, but each one works on both sides ( for example, "front" works on the front left and front right).
# Included files:
STL files of corner brackets for 3D Printing
STL files of corner brackets for laser cutting (or simpler/faster printing)
DXF files of corner brackets for laser cutting
# CAD
Click [here](https://cad.onshape.com/documents/591c224552473ec9ef428d7b/w/77b22edcc5f0994943cc0e72/e/9c973f793ee76a6e7d7907b5?renderMode=0&uiState=67a13a6e0b3f1d4205cf7654) for OnShape file
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!