Tiger

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 132.29x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.03906mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #75787b PLA anycubik textGray Transmission Distance: 2.4 #ffffff PLA Generic White Transmission Distance: 4This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #12 (0.6mm) swap to textGray At layer #18 (0.84mm) swap to White for the rest. Boost Me