Tiny-B210 case

I got a tiny USRP B210 clone from china, but the included “case” was basically just some shielding/protection for the electronics and had no mounting points for SMA connectors, so I designed this little enclosure to fit the radio with its antennas. Unfortunately on-board LEDs can't be seen using this case, but that didn't really matter to me. Edit: Updated version. Case is a tiny bit wider, lid has some holes for airflow and can be screwed on, connectors are now labeled. Should be printed with a rather heat-resistant material (e.g. ABS) since the radio can get quite hot. Assembly requires four additional M2 screws, 9mm seems to be the ideal length (they are easy to cut with some side cutters). If you want to screw on the lid instead of relying on a snap-fit you'll also need four M2x4mmx3.2mm heat inserts. Assembly:(Optional) Insert heat insertsScrew in SMA connectorsRemove screws from original TinyB210 heat sinkPlace TinyB210 into the case, try to keep the heat sink aligned