Thingiverse

Tiny printer test - quick print!

by splabble

582 Downloads

284 Likes

0 Makes

**The *TINY printer test* is designed to print in minutes, so you can quickly tweak & test your printer settings and get better prints.**

Just a few centimetres across, it can print in as little as 10/15 mins and includes 10+ different tests:

* Hole fit tests (0.2/0.4/0.6mm gaps)
* Bridging test (15/10/5mm)
* Dimensional accuracy tests (X/Y/Z/ØXZ/ØYZ)
* Overhang tests (25/35/45°)
* Wall thickness tests (1.0/0.8/0.8/0.4/0.3/0.2/0.1mm)
* Stringing & retraction tests
* Complex shape and font tests
* Hole test
* First layer adhesion

Print without supports, 20%+ infill and whatever settings you want to test. The slower you print and smaller the layer height the better it is likely to look.

Please do comment with your suggestions on how it could be improved.

accuracy test bridge bridge test bridging test calibrate calibration calibration cube Calibration part calibration test Fast fast print fit test overhang test printer calibration print accuracy quick quick print rapidstrike small test test print tiny accuracy test bridge bridge test bridging test calibrate calibration calibration cube Calibration part calibration test Fast fast print fit test overhang test printer calibration print accuracy quick quick print rapidstrike small test

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer