Thingiverse

Tiny Tester

by GE4R_HE4D

5 Downloads

9 Likes

0 Makes

_TINY TESTER_
It is designed to test printing quality properties in the smallest space possible.

>_! ONLY USE SUPPORTS AS SHOWN !_

TESTS INCLUDED

>Stringing
>Clearance
>Carved Texts
>Bridging
>Curvature Layers
>Overhang Gaps
>Overhang Angles
>External Supports
>Internal Supports
>Angled Supports
>Scaling
>Layer Quality
>Adhesion

HOW TO USE

>1) Align the model as the Y axis labeled at the bottom of the part.
>2) Add support structure to only the "letter D" shaped overhang.
>3) Start to print and observe. If anything goes wrong, stop the print asap.
>4) Clear the support and separate the "screw-shaped pins" by breaking their tips.
>5) Examine each side of the part and perform the clearance test by inserting the separated "screw-shaped pins" into the vertical and horizontal holes.

3DBenchy Benchy calibration carved clearance clearance test cube curves gap Gap test hole part pins print quality quality test string Stringing stringing test temperature test test

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format