Thingiverse
Tiny Tester
door GE4R_HE4D
5
Downloads
9
Likes
0
Makes
_TINY TESTER_
It is designed to test printing quality properties in the smallest space possible.
>_! ONLY USE SUPPORTS AS SHOWN !_
TESTS INCLUDED
>Stringing
>Clearance
>Carved Texts
>Bridging
>Curvature Layers
>Overhang Gaps
>Overhang Angles
>External Supports
>Internal Supports
>Angled Supports
>Scaling
>Layer Quality
>Adhesion
HOW TO USE
>1) Align the model as the Y axis labeled at the bottom of the part.
>2) Add support structure to only the "letter D" shaped overhang.
>3) Start to print and observe. If anything goes wrong, stop the print asap.
>4) Clear the support and separate the "screw-shaped pins" by breaking their tips.
>5) Examine each side of the part and perform the clearance test by inserting the separated "screw-shaped pins" into the vertical and horizontal holes.
It is designed to test printing quality properties in the smallest space possible.
>_! ONLY USE SUPPORTS AS SHOWN !_
TESTS INCLUDED
>Stringing
>Clearance
>Carved Texts
>Bridging
>Curvature Layers
>Overhang Gaps
>Overhang Angles
>External Supports
>Internal Supports
>Angled Supports
>Scaling
>Layer Quality
>Adhesion
HOW TO USE
>1) Align the model as the Y axis labeled at the bottom of the part.
>2) Add support structure to only the "letter D" shaped overhang.
>3) Start to print and observe. If anything goes wrong, stop the print asap.
>4) Clear the support and separate the "screw-shaped pins" by breaking their tips.
>5) Examine each side of the part and perform the clearance test by inserting the separated "screw-shaped pins" into the vertical and horizontal holes.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
