Thingiverse
Tiny Whoop Case
von HeinoJaeger
22
Downloads
21
Likes
0
Makes
ENGLISH:
I developed this case in SOLID WORKS based on the images in the thingiverse database, but I would like to add one logo and some texts in the box, so I developed my case from the beginning.
YOUTUBE DRONES 4 YOU CHANNEL LINK https://www.youtube.com/channel/UCmeJ9zL0gwgnX1yxs2gIX8Q
project video link:
https://www.youtube.com/watch?v=nZ9mBtxfdWI&t=0s
This box is for the tiny whoop micro drones and for the induction of the BLADE horizon hobby
I used CURA software to print to the ANET A8 printer.
Made available a part of the top cover to do the fit test, after the printed test you can use the scale to fit the cover on the base.
I am making available the STL print files and the Gcode files for the ANET A8 printer.
I made this support with ABS material, you can make with PLA, but need other temperature configurations
my printing tests were made using 0.4 mm nozzle and 0.8 mm for shell thickness
Nozzle temperature 240 Celsius degrees, Bed Temperature 105
I developed this case in SOLID WORKS based on the images in the thingiverse database, but I would like to add one logo and some texts in the box, so I developed my case from the beginning.
YOUTUBE DRONES 4 YOU CHANNEL LINK https://www.youtube.com/channel/UCmeJ9zL0gwgnX1yxs2gIX8Q
project video link:
https://www.youtube.com/watch?v=nZ9mBtxfdWI&t=0s
This box is for the tiny whoop micro drones and for the induction of the BLADE horizon hobby
I used CURA software to print to the ANET A8 printer.
Made available a part of the top cover to do the fit test, after the printed test you can use the scale to fit the cover on the base.
I am making available the STL print files and the Gcode files for the ANET A8 printer.
I made this support with ABS material, you can make with PLA, but need other temperature configurations
my printing tests were made using 0.4 mm nozzle and 0.8 mm for shell thickness
Nozzle temperature 240 Celsius degrees, Bed Temperature 105
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!