MakerWorld

Other Toys & Games

Tire stack

by Sheep guy · Other Toys & Games

4 Downloads

5 Likes

0 Makes

This is a customizable tire stack.It prints without support in ~2 hours.Print the tires in any colors and arrange them in your own pattern.

Toy toy Car race racing racing accesory customizable CyberBrick cyberbrick accessories tire obstacle

Category

Other Toys & Games

Source

MakerWorld

Published

11.07.2025

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Tire stack need supports when printing?

No supports needed for Tire stack — it's designed to print clean off the bed.

How long does it take to print Tire stack?

According to the design notes, Tire stack takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Tire stack available in?

Tire stack is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Tire stack free to download?

Yes, Tire stack is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Tire stack

Similar Models

Add to Collection