Tombstone Stakes Mount

The tombstones for Halloween have gotten cheaper and thinner. I went through repairing our tombstones and decided I needed a better solution for the stakes that would make the tombstones last longer and be secure. Especially since we add paint and EL wire to our tombstones. These use a compliant hole to adapt to the rod sizes. This also gives some flex for wind and such. Printing: I used PETG for the sun/weather and Extra Rough Draft since they are functional only :)Usage: I use 2 per stake. Smaller tombstones I only used one stake and larger tombstones I used 2 (4 holders).Stakes: I made this to adapt to 6mm-8mm rods. I buy the steel rods from the big box store and then cut them down to size.Attaching: There is a glue channel on the back and I attached them with hot glue to the back and they have not come off. If you have problems you may want to switch to a good adhesive glue stick and/or high-temp.