Free Other STL Download - Tool holderby Vman11941

UPDATE: I decided to adjust this design into a modular tool station and have posted that here: https://www.crealitycloud.com/model-detail/modular-tool-station?source=22If you liked this tool station please take a look at that one.Just getting into 3d modeling, and figured this was a decent place to start. Couldn't find any other models that worked for what I wanted, and most were smaller than what I wanted.A few of the spots are more purpose built like the soldering kit and the precision kit, but the rest should be fairly universal.I didn't really need to play with settings at all, should be .2 layers and 15% infill. Print took just over 18 hours for me.Definitely open to input as I'm still new to modeling, and looking to improve.UpdateAdded a V2 with some modifications I made.Got tired of reaching around my iron case, so moved it to the back, and the larger generic tool holes to the center. Also added some holes up top for some c245 and c210 soldering iron tips as those are what I used. I also adjusted the positioning of existing holes, mostly spacing things out as I was having issues with things getting in the way of others. Also added a tiny bit of height to the bottom catchall tray for a tad bit of extra capacity.I printed this one with lightning infill to save on time and filament, as I wasn't sure if everything would be quite right and it did save 200g and 7 hours, but it should be dialed in and I'll probably redo with default infill.