Thingiverse

Tool Holder

by israelvalenciac

0 Downloads

1 Likes

0 Makes

Hi, this is a tools holder I made in Solidworks, taken from an example of a toolholder from a different website but that had a price.

I resized it to be 200mm wide, I also have the 250mm wide version.

Cura 4.6.1 Settings
- 0.3 mm
- 10% Infill
- No support
- No adhesion

432g - 144.68m
1 day 6 hours 38 minutes of printing

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

6 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Tool Holder need supports when printing?

No supports needed for Tool Holder — it's designed to print clean off the bed.

How long does it take to print Tool Holder?

According to the design notes, Tool Holder takes approximately 6 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Tool Holder available in?

Tool Holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Tool Holder free to download?

Yes, Tool Holder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Tool Holder

Add to Collection