Toolbox Cigarette case

Milwaukee Cigarette ToolboxA Milwaukee-inspired cigarette box with space for 20 cigarettes and a lighter. Visual design inspired by the original concept from Eureka 3D Printing. This is a redesign with different dimensions and internal structure. This model should be printed in separate parts, then glued and assembled using screws.I used 4 self-tapping screws (BT 2x6) from Bambu Lab's website. The length of the screws should not exceed 6mm. i recommend using 6 magnets for the lid and body, but 4 should work as well, but it wont be as strong.You will need magnets with a diameter of 3mm and a depth of 1mm.when gluing the magnets, remember to make sure you place them the right way up, so the two sides attract each other. UPDATE: I Just added a version for 100's if thats your thing, same design just a bit longer :)most pieces are compatible except for the cornerpieces