Toulouse Stadium

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5 PLA BambuLab Tough Black Transmission Distance: 0.6This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Grey At layer #19 (1.6mm) swap to WhiteThis slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.Border Only Colors from here until the end. At layer #27 (2.24mm) swap to Black for the rest.