Tower

Measurements:Measurements are 1.5 inch by 1.5 inch by 3 inchOr 38.1 mm by 3.81 mm by 76.2 mmPrinting:I printed mine for a tower competition, so if you want to follow the same rules, here they are:Rules:Must be 3 - 4 inches (76.2 - 101.6 mm) tallMust have a ½ inch (12.7 mm) hole through the center verticallyMust weigh less than 15 gramsMust have an internal volume of 9 squared inches(I'm pretty sure mine followed the last rule although I might be off)Slicing:For my tower to cut the weight, I printed it at0% infill1 perimeterSolid layers top/bottom 1 as wellNo supports This was printed on an MK4sThis held 311.6 lbs (141.3 kg)It failed on the diagonal outer corners, top right and bottom left in cover image