Thingiverse
Trium3D FSR board mount
por lucapaschi
2
Descargas
1
Likes
0
Makes
Mount for FSR sensor board. It can be fixed to one of the spare holes in the Trium base with an M3/M4 screw and nut.
It was design to fix and protect the board, so it does not move around or accidentally gets crushed by the printer base. Having a fixed board, makes the cable management of the sensors easier.
If using a metal screw, remember to put something to isolate the head of the screw from the aluminium bed, or bad things might happen if the board goes off balance and touches the frame while the printer is active.
It was design to fix and protect the board, so it does not move around or accidentally gets crushed by the printer base. Having a fixed board, makes the cable management of the sensors easier.
If using a metal screw, remember to put something to isolate the head of the screw from the aluminium bed, or bad things might happen if the board goes off balance and touches the frame while the printer is active.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
