Turbofan Engine Model

Printing Settings:
The model was printed with an Anet A8 with a scale of 1.
(I had to change the machine settings in the firmware, with the scale of 0,95 it will work to print the parts without changing the settings)

Used Material:

Esun PLA white 1.75 mm* (Printing Temperature 200°C)

Esun PLA black 1.75 mm* (Printing Temperature 200°C)

Bed Temperature: 50°C
Printing speed: 50-80 mm/s
Nozzle Size: 0.4 mm