Tools & Spare Parts STL Download - Turntableby Razey9

Edit: Added an .stl for a new version, it's smaller and doesn't require 608 bearings. It's basically a thrust bearing, reference the last two photos...200mm diameter turntable for airbrushing, painting, and 3D scanning. I looked for a file to download on crealitycloud.com and didn't find what I was looking for, so I made my own. The models I did find were either complicated requiring you to print a bunch of gears, required an electric motor, or simply looked like they could only handle a very lightweight object. This turntable can handle well over 10 pounds and still turns nicely, reference photos. Total time to print is about 4 hours on a K1C in PLA (2 hours each file). Print time will depend on your printer, print settings, and printing material.Instructions:-Required, 608 bearings x 4. (8mm inner diameter, 22mm outer diameter, 7mm wide)-Recommend using Creality's default PLA print settings with the exception of adding 1 extra wall loop.-No structure supports.-Optional, enable brim. (I did not enable brim and it printed fine)-Optional, small amount of glue for the ends of the bearing shafts to keep the bearings in place while you transport it.-Optional, turn off the side/auxiliary fan once it starts on printing infill. This can prevent uneven cooling/warping and leading to the print detaching from the build plate. (I turned off the side fan once all the bottom layers were finished)