Turtle

Picture source/author: @hanzo.ai.art / HanzoAI Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.   Model is 150x200 mm in size. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.1mm and the Actual Depth is 2.1mm It is possible to print without ACE by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used:     PLA Elegoo+ Black Transmission Distance: 0.3     PLA Bambulab Basic Brown Transmission Distance: 2     PLA Elegoo + Gray Transmission Distance: 3     PLA Elegoo Matt White Transmission Distance: 6 This print uses 4 unique filaments   Swap Instructions:     Start with Black     At layer #9 (0.8mm) swap to Brown     At layer #11 (0.96mm) swap to Gray     At layer #18 (1.52mm) swap to White for the rest.