Twin Peaks Bookend

Hi there!Here are the files for the “Twin Peaks Bookend” – a model that is a combination of the files of “Twin Peaks Black Lodge Set” by DTuininga and “Twin Peaks Bookend” by mtakis. Both model sets were published awhile ago, so I refreshed them and made sure the files were suitable for printing. The pictures are my own of the set I printed. My other issue with the original models was the lack of assembly directions for the bookends. I did some redesigns for simplicity sake and to allow the model to be fully 3D printed (original model called for plywood). I also remodeled the lamp files as they were too thin for printing with a 0.4 nozzle. ASSEMBLY NOTES:Use superglue/E6000/your choice of adhesive to stick parts down.The tolerances for the base inside the frame are press-fit tight. I used a rubber mallet to make sure the model was fully in place. Feel free to scale the “base” model down by +/- .05 if you are struggling with getting it to fit inside the frame. Everyone's printers ha