Thingiverse
Two part box
von bobc
5
Downloads
7
Likes
4
Makes
A two part box consisting of a lower and upper shell. The lower part is screwed to the upper part. Mounting bosses enable a PCB to be mounted in upper or lower part.
The inner dimensions are 104x62x22mm. The reason for the odd placement of mounting bosses is because our PCB was designed to fit in a Hammond case.
Generated from OpenSCAD script, may be customised.
The exploded view shows a PCB mounted in the lower half shell.
Designed for Lyre* project, a project to design and build a Free/Open hardware audio player (DAP) and recorder, for use with Rockbox firmware**.
* lyre.sourceforge.net
** rockbox.org
Status : not tested
Rev 2: place the mounting points for Lyre v1 PCB
TODO: add apertures for connectors, LCD
The inner dimensions are 104x62x22mm. The reason for the odd placement of mounting bosses is because our PCB was designed to fit in a Hammond case.
Generated from OpenSCAD script, may be customised.
The exploded view shows a PCB mounted in the lower half shell.
Designed for Lyre* project, a project to design and build a Free/Open hardware audio player (DAP) and recorder, for use with Rockbox firmware**.
* lyre.sourceforge.net
** rockbox.org
Status : not tested
Rev 2: place the mounting points for Lyre v1 PCB
TODO: add apertures for connectors, LCD
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!