Slicer Discord
”打不开的“-鸡蛋/"Unbreakable" - egg – 3D-Druckmodell von MakerOnline MakerOnline
”打不开的“-鸡蛋/"Unbreakable" - egg – Bild 1 ”打不开的“-鸡蛋/"Unbreakable" - egg – Bild 2 ”打不开的“-鸡蛋/"Unbreakable" - egg – Bild 3 ”打不开的“-鸡蛋/"Unbreakable" - egg – Bild 4 ”打不开的“-鸡蛋/"Unbreakable" - egg – Bild 5
Toys&Games

”打不开的“-鸡蛋/"Unbreakable" - egg

4 Downloads
26 Likes
0 Makes
Zum Modell
”打不开的“-鸡蛋/"Unbreakable" - egg 注:额外配件 直径5高度10金属圆柱销钉*2 直径4高度2磁铁*2,按图装配即可。 这是一个机关盒子,可以藏一起惊喜和秘密,巧妙的利用磁铁和金属销钉作为机关。操作他的方法就藏在他的名字里--蛋。那么怎么打开一个蛋呢,毫无疑问是”砸。“ 装配好,正面向下砸,磁铁吸住金属销就会锁死,正面向上砸,金属销脱离磁铁就会解锁,这样就可以打开了 把你的惊喜装入秘密盒子送给你的朋友吧 Note: Additional accessories include 2 metal cylindrical pins (diameter 5, height 10) and 2 magnets (diameter 4, height 2). Assemble according to the diagram. This is a mechanical box that can conceal surprises and secrets, ingeniously utilizing magnets and metal pins as mechanisms. The method to operate it is hidden in its name—"egg." So how do you open an egg? Undoubtedly, by "cracking it.". “ Assemble it, then strike it face-down. The magnet will lock the metal pin in place. Strike it face-up to release the metal pin from the magnet, allowing it to open Put your surprise into a secret box and give it to your friend
Kategorie
Toys&Games
Quelle
MakerOnline
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen