Undermount bracket

I needed a bracket under the cabinet to store my scale. My scale is not one of the “most sold” on Amazon, so I couldn't find any in MakerWorld.So I created my own. The main profile has a usable 150mm depth, with 4mm thickness. It has an 11mm hole to fit the screwdriver and a small ramp at the front to avoid it going out accidentally and uses 6g screws. I created it with the customizable scad code attached to the model so you can personalise to whatever you need to attach under anything you can add a screw on. You can personalise the following:Usable depthWidthBrackets on both sidesConnect sides to do an enclosureAdd/remove a back stopperAdd a ramp at the insert point to stop sliding outAdd screws and screwdriver holeSelect the size of the screw (6g, 8g,…)