MakerWorld
Other Hobby & DIY
Ver Modelo
Unicorn - Bookmark
171
Descargas
126
Likes
98
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 55x163.62mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 1.8mm and the Actual Depth is 1.9mm Filaments Used: PLA Aurapol Black Transmission Distance: 0.4 PLA Aurapol Grandma Gray Transmission Distance: 3.7 PLA Aurapol White Transmission Distance: 2.7This print uses 3 unique filaments (You can also use similar colors from other manufacturers) Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Grandma Gray At layer #18 (1.52mm) swap to White for the rest.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
