Unicorn

Project: UnicornPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.9mm and the Actual Depth is 2.5mm Filaments Used: PLA BambuLab Black PLA BambuLab Basic Jade WhiteThis print uses 2 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Jade White for the rest. Disclaimer: I have yet to print this. this is my second attempt at making something in hueforge, the first is currently printing. if you print it before me, points to you.