Universal Printer Electronics Case

I initially designed this case for my Ender3v2 to sit on, but have since realized that you can use it for any printer universally. Has plenty of volume for your needs. It consists of to laser cut and folder aluminium panels and printed parts.

You could design mounts for it for another printer somewhere.

Inside I have mounted the original E3v2 PSU, a Sonoff Wifi power switch, 5v PSU 2x 24v mosfets (1 for bed, 1 for extruder), Octopus MCU, RPi 4b, Klipper expander controlling 3 case fans, ATX-Raspi power controller with 19mmØ RPi led soft button, 22mmØ USB3 two-way female output jack, 22mmØ Cat6e two-way female output jack and the fused mains power in jack.

The Sonoff power switch is controlled by the mainsail.conf which introduces a power swtich in Mainsail.

PSU earths itself to the aluminium. I have checked.

No BOM as yet. I'll also update this with a BOM at some point...
BOM generally has losts of M2.5x3mm and M3x6mm screws and M3 heat set inserts. A couple of M3x25mm