Thingiverse
Universal Scope Mount
door foehn
10
Downloads
3
Likes
0
Makes
A universal scope mount for air rifles on a picatinny rail. You can adjust it for your needs.
Attached are different mounts for 1" tubes and different heights. Choose the main body for your needs (the height is from upper picatinny to the lower tube) and print it together with the clamp and the bracket.
If you download the F3D file you can open it in Fusion360. Just by editing the parameters under 'change - Parameters' you can type in the heights, or the tube diameter in inch or mm, or the lengths of the mount, and the drawing will change instantly, without touching the sketch.
For airguns it is super, but with 65% infill, it will be ok for big rifles as well.
Have fun
This will save you $60 - $150 Dollar compare to a commercial mount.
Attached are different mounts for 1" tubes and different heights. Choose the main body for your needs (the height is from upper picatinny to the lower tube) and print it together with the clamp and the bracket.
If you download the F3D file you can open it in Fusion360. Just by editing the parameters under 'change - Parameters' you can type in the heights, or the tube diameter in inch or mm, or the lengths of the mount, and the drawing will change instantly, without touching the sketch.
For airguns it is super, but with 65% infill, it will be ok for big rifles as well.
Have fun
This will save you $60 - $150 Dollar compare to a commercial mount.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!