Updated Sequential Mod for H-Pattern Hall Sensor Shifter ("ODDOR Gear")

I've updated the file to reflect the current iteration of this shifter.

V1/2 Hardware: 10x5mm magnets (10x2 is fine too), needs 3d printed snap in spacer if used roughly
V3 Hardware: M3*22 with 10x5mm magnets (10x2 is fine too). Spacer can help but not needed with correct tension on the bolt, but not too much to where it can't be slid out of the way for regular shifting.

From the IssaP original summary: https://www.thingiverse.com/thing:5449386

"This is a mod to make the hall sensor H-pattern shifter from Aliexpress/Banggood etc. sequential.

My shifters PCB is not the same as the Project D shifter in the video from Sim Racing Corner. On my shifter the hall sensors are much smaller and soldered directly onto the PCB without the bent legs. So I'm not sure it will work for every shifter of this type. My shifter from Aliexpress has "ODDOR" lettering on the housing and the knob, but I'm not sure how many different revisions there are.

The simple idea of this shifter is to put 10mm