Thingiverse
USB2DB15 Case
by Zepherino
2
Downloads
1
Likes
0
Makes
This is a snap case for the USB2DB15 PCB by Raph_friend.
There are a few other cases out there, including an official one, which you can find on the USB2DB15 forum thread at https://www.arcade-projects.com/threads/open-source-usb2db15-for-supergun-adapter.14205/
For this particular case, I wanted to make sure that the USB port has ample clearance, and I wanted the wall thickness of the PCB case to a very narrow .9mm, which is required to fit 2 of these PCBs onto Frank_fjs' Minigun Supergun.
There are a few other cases out there, including an official one, which you can find on the USB2DB15 forum thread at https://www.arcade-projects.com/threads/open-source-usb2db15-for-supergun-adapter.14205/
For this particular case, I wanted to make sure that the USB port has ample clearance, and I wanted the wall thickness of the PCB case to a very narrow .9mm, which is required to fit 2 of these PCBs onto Frank_fjs' Minigun Supergun.
Zepherino also publishes on
8 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
