Thingiverse
USB2DB15 Case
di Zepherino
2
Download
1
Likes
0
Makes
This is a snap case for the USB2DB15 PCB by Raph_friend.
There are a few other cases out there, including an official one, which you can find on the USB2DB15 forum thread at https://www.arcade-projects.com/threads/open-source-usb2db15-for-supergun-adapter.14205/
For this particular case, I wanted to make sure that the USB port has ample clearance, and I wanted the wall thickness of the PCB case to a very narrow .9mm, which is required to fit 2 of these PCBs onto Frank_fjs' Minigun Supergun.
There are a few other cases out there, including an official one, which you can find on the USB2DB15 forum thread at https://www.arcade-projects.com/threads/open-source-usb2db15-for-supergun-adapter.14205/
For this particular case, I wanted to make sure that the USB port has ample clearance, and I wanted the wall thickness of the PCB case to a very narrow .9mm, which is required to fit 2 of these PCBs onto Frank_fjs' Minigun Supergun.
Zepherino pubblica anche su
8 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
