MakerWorld
3D Printer Accessories
Go to Model
v2.0 Ball Valve Socket - DKSTUDIO
129
Downloads
77
Likes
39
Makes
这是2.0版本之前版本位置 https://makerworld.com/zh/models/435266#profileId-340332有如下修改 This is version 2.0Previous version location https://makerworld.com/zh/models/435266#profileId-340332There are the following modifications 1.更大可动面积的球形阀 极限偏移角度可达25°A ball valve with a larger movable area and a limit offset angle of up to 25° 2.翻转球阀安装，可以让气动接头位置更低Flip the ball valve installation to allow the pneumatic joint to be positioned lower 3.一体打印铰链，无需耗材加固，结构强度完全够用Integrated printed hinge, no consumable reinforcement is required, and the structural strength is fully sufficient4.模型自带裙边，保证成功率且易拆除The model with brim, which ensures success rate and easy to remove. --------------全部模型不需要支撑用时大约43分钟。耗材消耗约14克需要在需要安装的位置开一个直径22mm的孔<
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
