V2 Lithophane Frame

This is an updated version of the lithophane frame created by @JohnOldman.

The new frame includes a second panel slot allowing for a 1mm thick diffusing panel to be inserted between the LEDs and lithophane. Originally the LEDs were shining too bright and concentrated through the litho even with efforts to make the litho thicker.

The LEDs are cut in six rows, with 8 LEDs in each, all wired in parallel and supplied 5V from a stripped micro-USB cable.

For the lithophane, I used lithophanemaker.com. Below are the settings to allow for a proper fit in the frame. I encourage you to experiment with other variations (Specifically the overhang angle and depth).

Lithophane Resolution: 0.2mm
Width: 144mm
Height: 113mm
Depth: 2mm
Base Height: 6mm
Overhang Angle: 60deg
Max Thickness: 5mm
Min Thickness: 1.8mm

LEDs:
https://www.amazon.com/dp/B08M65DKZ7?ref=ppx_yo2ov_dt_b_product_details&th=1

Rocker Switch:
https://www.amazon.com/dp/B07SPY9H7Y?psc=1&ref=ppx_yo2ov_dt_b_pro